Amiga Forever by Cloanto
 
Home Products
 
 
TITLE

Reading Amiga Floppy Disks on PC

 

TOPIC

How to access data on Amiga floppy disks from a PC.

 

DISCUSSION

Amiga floppy disks cannot be read on PCs without installing additional hardware such as a special floppy disk controller or a second floppy drive. There is no software-only solution to read Amiga disks on a PC. As Amiga users know, this hardware incompatibility has limited Amiga-PC data sharing since the Amiga was released in the mid-80s. Although newer software and hardware have helped overcome this limitation, there is no way that software emulation alone can solve it: a PC cannot fully read Amiga disks using only the default PC floppy disk controller logic attached to a single disk drive (partial reads and/or "destructive reads" are possible, but unfit for most purposes).

The opposite is true, i.e. the Amiga, which has a more "flexible" hardware than most PCs, can read and write floppy disks in the MS-DOS format. The Amiga Forever media for example always included the MSH file system, which allows users of all Amiga operating systems from version 1.2 upwards to read and write MS-DOS floppy disks, which can then be used to share data with PC systems.

If you have a functioning Amiga computer, we support Amiga Explorer as the easiest choice to transfer data to and from a Windows system. With Amiga Explorer, an Amiga computer can be connected to the PC via a null-modem serial cable or TCP/IP (e.g. Ethernet), and then be accessed as a "virtual floppy disk" from the Windows Desktop. The Amiga computer itself does not even require a monitor, if it is booted from a floppy disk which also launches the Amiga Explorer server software. Amiga Explorer is included with Amiga Forever.

Amiga Forever 10 supports Rob Smith's FloppyBridge software, meaning that the Waffle USB drive, and floppy disk drives attached to controllers like the SuperCard Pro, the Greaseweazle and the DrawBridge can be used directly in the Amiga emulation. The FloppyBridge software is preinstalled and preconfigured in Amiga Forever. To make a floppy drive available in the emulation, configure it under Tools/Options/Profiles/Physical Floppy Drives. Floppy profiles can be referenced in titles via the Media tab, where they are listed as additional drive options.

The following hardware solutions can be used to read (and in many cases write) Amiga disks via a floppy drive attached to the PC:

  • The Waffle by Retrogiovedì (based on work by Gianluca Renzi and Rob Smith) is an all-in one Amiga disk drive and controller with USB interface, ready to be attached to a PC. The Waffle is compatible with the FloppyBridge software.
  • Jim Drew's SuperCard Pro floppy controller, which is connected to the PC via USB. The SuperCard Pro has a higher flux resolution than other devices, and may be used for both commercial and non-commercial purposes. The SuperCard Pro is compatible with the FloppyBridge software.
  • FloppyBridge-compatible open source floppy disk interface projects include Keir Fraser's Greaseweazle hardware and software, the Arduino-based DrawBridge (aka Arduino Powered Floppy Disk Reader/Writer) by Rob Smith and its USB floppy controller for Amiga disks adaptation by John Tsiombikas.
  • Additional open source projects include Dominik Tonn's ADF Drive and ADF Copy, as well as the FluxEngine by David Given and Charlie Smurthwaite's FlexFloppy.
  • The KryoFlux floppy controller, by the Software Preservation Society, which is connected to the PC via USB. The consumer version of this product is sold under a strict "no commercial use" license.
  • The adfread software by Toni Wilen and Simon Owen, combined with a second floppy drive. This software works with the most common floppy disk controllers used in industry-standard PCs, requiring no custom hardware other than an inexpensive additional PC floppy drive, connected to the same cable as the first drive. This is a read-only solution, and only supports Windows 2000 and later versions of Windows, including Windows 11 (but not Windows 95, Windows 98, Windows Me or Windows NT).
  • The Disk2FDI software by Vincent Joguin, combined with a second floppy drive. This is the original software which inspired adfread, but it only supports Windows 95, Windows 98 and Windows Me (not Windows NT, Windows 2000 or later versions).
  • The "Amiga Floppy Reader" (AFR), designed by Marco Veneri, is an interface which can connect an external Amiga floppy disk to the PC's parallel port. This is a read-only solution with DOS-only software.
  • While not able to read disks, the ADTwin software, by M. Rode, makes it possible to write ADF disk image files to floppy disks using a floppy disk drive attached to a PC's parallel port. This is a write-only solution that requires at least Windows XP (SP2 or SP3).

Cloanto also offers used to offer a data conversion service, which may be of special interest to convert a few floppy disks without installing special hardware.

When trying to access old disks it is important to minimize the number of read attempts. Ideally a disk (or tape) should be read a first time with the best possible sampling hardware. If the data is already hardly readable, each additional step may bring with it a risk of further reducing the quality of the signal.

Amiga emulation programs like UAE and Fellow use "disk images" of Amiga floppy disks. The most used file format used for these images is called "ADF" (from "Amiga Disk File"). Each Amiga floppy disk can be stored in an ADF file (or split in more than one ADF file). ADF files can be created on an Amiga with a tool like "transdisk", or they can be created on the fly by Amiga Explorer. Both are included on Amiga Forever. Both the Catweasel and the AFR hardware come with software to create an ADF file from an Amiga floppy disk.

Please note that ADF files and most other disk connectivity tools described here currently only support standard Amiga floppy disks, and not certain non-standard "copy protection" schemes, which in part also fail on different types of original Amiga floppy drives. If the Amiga DiskCopy command cannot copy a disk, it is likely that the creation of the ADF disk image file will also fail to produce a working result. For archival purposes, you may want to create a disk image in DMS format (DMS supports a few simple copy protection schemes), if possible. The SuperCard Pro and the KryoFlux systems described on this page excel at managing some copy protection formats. It is also likely that a future version of the emulation software will include extended direct support for one or more modern controllers so as to also support copy protection.

The Amiga Forever Game Downloads page includes a variety of preservation sites hosting disk images of famous Amiga game disks, as well as other software. These games have been released for online distribution by the original publishers. It is very likely that any Amiga games you may have on floppy disk are now available for download in this format, with copy protection removed, if so required.

Related Links

 

Article Information
Article ID: 13-118
Platform: Windows, Amiga
Products: Amiga Forever
Additional Keywords: cryoflux
Last Update: 2022-12-09
Your feedback is always appreciated. It is safe to link to this page.